NAME
Net::Telnet - interact with TELNET port or other TCP ports
SYNOPSIS
use Net::Telnet ();
see METHODS section below
DESCRIPTION
Net::Telnet allows you to make client connections to a TCP port and do network I/O, especially to a port using the TELNET protocol. Simple I/O methods such as print, get, and getline are provided. More sophisticated interactive features are provided because connecting to a TELNET port ultimately means communicating with a program designed for human interaction. These interactive features include the ability to specify a time-out and to wait for patterns to appear in the input stream, such as the prompt from a shell.
Other reasons to use this module than strictly with a TELNET port are:
You're not familiar with sockets and you want a simple way to make client connections to TCP services.
You want to be able to specify your own time-out while connecting, reading, or writing.
You're communicating with an interactive program at the other end of some socket or pipe and you want to wait for certain patterns to appear.
Here's an example that prints who's logged-on to the remote host sparky. In addition to a username and password, you must also know the user's shell prompt, which for this example is bash$
use Net::Telnet ();
$t = new Net::Telnet (Timeout => 10,
Prompt => '/bash\$ $/');
$t->open("sparky");
$t->login($username, $passwd);
@lines = $t->cmd("who");
print @lines;
More examples are in the EXAMPLES section below.
Usage questions should be directed to the Usenet newsgroup comp.lang.perl.modules.
Contact me, Jay Rogers <jay@rgrs.com>, if you find any bugs or have suggestions for improvement.
What To Know Before Using
All output is flushed while all input is buffered. Each object contains its own input buffer.
The output record separator for
print()
andcmd()
is set to"\n"
by default, so that you don't have to append all your commands with a newline. To avoid printing a trailing"\n"
useput()
or set the output_record_separator to""
.The methods
login()
andcmd()
use the prompt setting in the object to determine when a login or remote command is complete. Those methods will fail with a time-out if you don't set the prompt correctly.Use a combination of
print()
andwaitfor()
as an alternative tologin()
orcmd()
when they don't do what you want.Errors such as timing-out are handled according to the error mode action. The default action is to print an error message to standard error and have the program die. See the
errmode()
method for more information.When constructing the match operator argument for
prompt()
orwaitfor()
, always use single quotes instead of double quotes to avoid unexpected backslash interpretation (e.g.'/bash\$ $/'
). If you're constructing a DOS like file path, you'll need to use four backslashes to represent one (e.g.'/c:\\\\users\\\\bill>$/i'
).Of course don't forget about regexp metacharacters like
.
,[
, or$
. You'll only need a single backslash to quote them. The anchor metacharacters^
and$
refer to positions in the input buffer. To avoid matching characters read that look like a prompt, it's a good idea to end your prompt pattern with the$
anchor. That way the prompt will only match if it's the last thing read.In the input stream, each sequence of carriage return and line feed (i.e.
"\015\012"
or CR LF) is converted to"\n"
. In the output stream, each occurrence of"\n"
is converted to a sequence of CR LF. Seebinmode()
to change the behavior. TCP protocols typically use the ASCII sequence, carriage return and line feed to designate a newline.Timing-out while making a connection is disabled for machines that don't support the
alarm()
function. Most notably these include MS-Windows machines.You'll need to be running at least Perl version 5.002 to use this module. This module does not require any libraries that don't already come with a standard Perl distribution.
If you have the IO:: libraries installed (they come standard with perl5.004 and later) then IO::Socket::INET is used as a base class, otherwise FileHandle is used.
Contact me, Jay Rogers <jay@rgrs.com>, if you find any bugs or have suggestions for improvement.
Debugging
The typical usage bug causes a time-out error because you've made incorrect assumptions about what the remote side actually sends. The easiest way to reconcile what the remote side sends with your expectations is to use input_log()
or dump_log()
.
dump_log()
allows you to see the data being sent from the remote side before any translation is done, while input_log()
shows you the results after translation. The translation includes converting end of line characters, removing and responding to TELNET protocol commands in the data stream.
Style of Named Parameters
Two different styles of named parameters are supported. This document only shows the IO:: style:
Net::Telnet->new(Timeout => 20);
however the dash-option style is also allowed:
Net::Telnet->new(-timeout => 20);
Connecting to a Remote MS-Windows Machine
By default MS-Windows doesn't come with a TELNET server. However third party TELNET servers are available. Unfortunately many of these servers falsely claim to be a TELNET server. This is especially true of the so-called "Microsoft Telnet Server" that comes installed with some newer versions MS-Windows.
When a TELNET server first accepts a connection, it must use the ASCII control characters carriage-return and line-feed to start a new line (see RFC854). A server like the "Microsoft Telnet Server" that doesn't do this, isn't a TELNET server. These servers send ANSI terminal escape sequences to position to a column on a subsequent line and to even position while writing characters that are adjacent to each other. Worse, when sending output these servers resend previously sent command output in a misguided attempt to display an entire terminal screen.
Connecting Net::Telnet to one of these false TELNET servers makes your job of parsing command output very difficult. It's better to replace a false TELNET server with a real TELNET server. The better TELNET servers for MS-Windows allow you to avoid the ANSI escapes by turning off something some of them call console mode.
METHODS
In the calling sequences below, square brackets [] represent optional parameters.
- new - create a new Net::Telnet object
-
$obj = new Net::Telnet ([$host]); $obj = new Net::Telnet ([Binmode => $mode,] [Cmd_remove_mode => $mode,] [Dump_Log => $filename,] [Errmode => $errmode,] [Fhopen => $filehandle,] [Host => $host,] [Input_log => $file,] [Input_record_separator => $chars,] [Option_log => $file,] [Ors => $chars,] [Output_log => $file,] [Output_record_separator => $chars,] [Port => $port,] [Prompt => $matchop,] [Rs => $chars,] [Telnetmode => $mode,] [Timeout => $secs,]);
This is the constructor for Net::Telnet objects. A new object is returned on success, the error mode action is performed on failure - see
errmode()
. The optional arguments are short-cuts to methods of the same name.If the $host argument is given then the object is opened by connecting to TCP $port on $host. Also see
open()
. The new object returned is given the following defaults in the absence of corresponding named parameters:The default Host is
"localhost"
The default Port is
23
The default Prompt is
'/[\$%#>] $/'
The default Timeout is
10
The default Errmode is
"die"
The default Output_record_separator is
"\n"
. Note that Ors is synonymous with Output_record_separator.The default Input_record_separator is
"\n"
. Note that Rs is synonymous with Input_record_separator.The default Binmode is
0
, which means do newline translation.The default Telnetmode is
1
, which means respond to TELNET commands in the data stream.The default Cmd_remove_mode is
"auto"
The defaults for Dump_log, Input_log, Option_log, and Output_log are
""
, which means that logging is turned-off.
- binmode - toggle newline translation
-
$mode = $obj->binmode; $prev = $obj->binmode($mode);
This method controls whether or not sequences of carriage returns and line feeds (CR LF or more specifically
"\015\012"
) are translated. By default they are translated (i.e. binmode is0
).If no argument is given, the current mode is returned.
If $mode is
1
then binmode is on and newline translation is not done.If $mode is
0
then binmode is off and newline translation is done. In the input stream, each sequence of CR LF is converted to"\n"
and in the output stream, each occurrence of"\n"
is converted to a sequence of CR LF.Note that input is always buffered. Changing binmode doesn't effect what's already been read into the buffer. Output is not buffered and changing binmode will have an immediate effect.
- break - send TELNET break character
-
$ok = $obj->break;
This method sends the TELNET break character. This character is provided because it's a signal outside the ASCII character set which is currently given local meaning within many systems. It's intended to indicate that the Break Key or the Attention Key was hit.
This method returns
1
on success, or performs the error mode action on failure.
- buffer - scalar reference to object's input buffer
-
$ref = $obj->buffer;
This method returns a scalar reference to the input buffer for $obj. Data in the input buffer is data that has been read from the remote side but has yet to be read by the user. Modifications to the input buffer are returned by a subsequent read.
- buffer_empty - discard all data in object's input buffer
-
$obj->buffer_empty;
This method removes all data in the input buffer for $obj.
- close - close object
-
$ok = $obj->close;
This method closes the socket, file, or pipe associated with the object. It always returns a value of
1
.
- cmd - issue command and retrieve output
-
$ok = $obj->cmd($string); $ok = $obj->cmd(String => $string, [Output => $ref,] [Cmd_remove_mode => $mode,] [Errmode => $mode,] [Input_record_separator => $chars,] [Ors => $chars,] [Output_record_separator => $chars,] [Prompt => $match,] [Rs => $chars,] [Timeout => $secs,]); @output = $obj->cmd($string); @output = $obj->cmd(String => $string, [Output => $ref,] [Cmd_remove_mode => $mode,] [Errmode => $mode,] [Input_record_separator => $chars,] [Ors => $chars,] [Output_record_separator => $chars,] [Prompt => $match,] [Rs => $chars,] [Timeout => $secs,]);
This method sends the command $string, and reads the characters sent back by the command up until and including the matching prompt. It's assumed that the program to which you're sending is some kind of command prompting interpreter such as a shell.
The command $string is automatically appended with the output_record_separator, By default that's
"\n"
. This is similar to someone typing a command and hitting the return key. Set the output_record_separator to change this behavior.In a scalar context, the characters read from the remote side are discarded and
1
is returned on success. On time-out, eof, or other failures, the error mode action is performed. Seeerrmode()
.In a list context, just the output generated by the command is returned, one line per element. In other words, all the characters in between the echoed back command string and the prompt are returned. If the command happens to return no output, a list containing one element, the empty string is returned. This is so the list will indicate true in a boolean context. On time-out, eof, or other failures, the error mode action is performed. See
errmode()
.The characters that matched the prompt may be retrieved using
last_prompt()
.Many command interpreters echo back the command sent. In most situations, this method removes the first line returned from the remote side (i.e. the echoed back command). See
cmd_remove_mode()
for more control over this feature.Use
dump_log()
to debug when this method keeps timing-out and you don't think it should.Consider using a combination of
print()
andwaitfor()
as an alternative to this method when it doesn't do what you want, e.g. the command you send prompts for input.The Output named parameter provides an alternative method of receiving command output. If you pass a scalar reference, all the output (even if it contains multiple lines) is returned in the referenced scalar. If you pass an array or hash reference, the lines of output are returned in the referenced array or hash. You can use
input_record_separator()
to change the notion of what separates a line.Optional named parameters are provided to override the current settings of cmd_remove_mode, errmode, input_record_separator, ors, output_record_separator, prompt, rs, and timeout. Rs is synonymous with input_record_separator and ors is synonymous with output_record_separator.
- cmd_remove_mode - toggle removal of echoed commands
-
$mode = $obj->cmd_remove_mode; $prev = $obj->cmd_remove_mode($mode);
This method controls how to deal with echoed back commands in the output returned by cmd(). Typically, when you send a command to the remote side, the first line of output returned is the command echoed back. Use this mode to remove the first line of output normally returned by cmd().
If no argument is given, the current mode is returned.
If $mode is
0
then the command output returned from cmd() has no lines removed. If $mode is a positive integer, then the first $mode lines of command output are stripped.By default, $mode is set to
"auto"
. Auto means that whether or not the first line of command output is stripped, depends on whether or not the remote side offered to echo. By default, Net::Telnet always accepts an offer to echo by the remote side. You can change the default to reject such an offer usingoption_accept()
.A warning is printed to STDERR when attempting to set this attribute to something that's not
"auto"
or a non-negative integer.
- dump_log - log all I/O in dump format
-
$fh = $obj->dump_log; $fh = $obj->dump_log($fh); $fh = $obj->dump_log($filename);
This method starts or stops dump format logging of all the object's input and output. The dump format shows the blocks read and written in a hexadecimal and printable character format. This method is useful when debugging, however you might want to first try
input_log()
as it's more readable.If no argument is given, the current log filehandle is returned. An empty string indicates logging is off.
To stop logging, use an empty string as an argument.
If an open filehandle is given, it is used for logging and returned. Otherwise, the argument is assumed to be the name of a file, the file is opened and a filehandle to it is returned. If the file can't be opened for writing, the error mode action is performed.
- eof - end of file indicator
-
$eof = $obj->eof;
This method returns
1
if end of file has been read, otherwise it returns an empty string. Because the input is buffered this isn't the same thing as $obj has closed. In other words $obj can be closed but there still can be stuff in the buffer to be read. Under this condition you can still read but you won't be able to write.
- errmode - define action to be performed on error
-
$mode = $obj->errmode; $prev = $obj->errmode($mode);
This method gets or sets the action used when errors are encountered using the object. The first calling sequence returns the current error mode. The second calling sequence sets it to $mode and returns the previous mode. Valid values for $mode are
"die"
(the default),"return"
, a coderef, or an arrayref.When mode is
"die"
and an error is encountered using the object, then an error message is printed to standard error and the program dies.When mode is
"return"
then the method generating the error places an error message in the object and returns an undefined value in a scalar context and an empty list in list context. The error message may be obtained usingerrmsg()
.When mode is a coderef, then when an error is encountered coderef is called with the error message as its first argument. Using this mode you may have your own subroutine handle errors. If coderef itself returns then the method generating the error returns undefined or an empty list depending on context.
When mode is an arrayref, the first element of the array must be a coderef. Any elements that follow are the arguments to coderef. When an error is encountered, the coderef is called with its arguments. Using this mode you may have your own subroutine handle errors. If the coderef itself returns then the method generating the error returns undefined or an empty list depending on context.
A warning is printed to STDERR when attempting to set this attribute to something that's not
"die"
,"return"
, a coderef, or an arrayref whose first element isn't a coderef.
- errmsg - most recent error message
-
$msg = $obj->errmsg; $prev = $obj->errmsg(@msgs);
The first calling sequence returns the error message associated with the object. The empty string is returned if no error has been encountered yet. The second calling sequence sets the error message for the object to the concatenation of @msgs and returns the previous error message. Normally, error messages are set internally by a method when an error is encountered.
- error - perform the error mode action
-
$obj->error(@msgs);
This method concatenates @msgs into a string and places it in the object as the error message. Also see
errmsg()
. It then performs the error mode action. Also seeerrmode()
.If the error mode doesn't cause the program to die, then an undefined value or an empty list is returned depending on the context.
This method is primarily used by this class or a sub-class to perform the user requested action when an error is encountered.
- fhopen - use already open filehandle for I/O
-
$ok = $obj->fhopen($fh);
This method associates the open filehandle $fh with $obj for further I/O. Filehandle $fh must already be opened.
Suppose you want to use the features of this module to do I/O to something other than a TCP port, for example STDIN or a filehandle opened to read from a process. Instead of opening the object for I/O to a TCP port by using
open()
ornew()
, call this method instead.The value
1
is returned success, the error mode action is performed on failure.
- get - read block of data
-
$data = $obj->get([Binmode => $mode,] [Errmode => $errmode,] [Telnetmode => $mode,] [Timeout => $secs,]);
This method reads a block of data from the object and returns it along with any buffered data. If no buffered data is available to return, it will wait for data to read using the timeout specified in the object. You can override that timeout using $secs. Also see
timeout()
. If buffered data is available to return, it also checks for a block of data that can be immediately read.On eof an undefined value is returned. On time-out or other failures, the error mode action is performed. To distinguish between eof or an error occurring when the error mode is not set to
"die"
, useeof()
.Optional named parameters are provided to override the current settings of binmode, errmode, telnetmode, and timeout.
- getline - read next line
-
$line = $obj->getline([Binmode => $mode,] [Errmode => $errmode,] [Input_record_separator => $chars,] [Rs => $chars,] [Telnetmode => $mode,] [Timeout => $secs,]);
This method reads and returns the next line of data from the object. You can use
input_record_separator()
to change the notion of what separates a line. The default is"\n"
. If a line isn't immediately available, this method blocks waiting for a line or a time-out.On eof an undefined value is returned. On time-out or other failures, the error mode action is performed. To distinguish between eof or an error occurring when the error mode is not set to
"die"
, useeof()
.Optional named parameters are provided to override the current settings of binmode, errmode, input_record_separator, rs, telnetmode, and timeout. Rs is synonymous with input_record_separator.
- getlines - read next lines
-
@lines = $obj->getlines([Binmode => $mode,] [Errmode => $errmode,] [Input_record_separator => $chars,] [Rs => $chars,] [Telnetmode => $mode,] [Timeout => $secs,] [All => $boolean,]);
This method reads and returns all the lines of data from the object until end of file is read. You can use
input_record_separator()
to change the notion of what separates a line. The default is"\n"
. A time-out error occurs if all the lines can't be read within the time-out interval. Seetimeout()
.The behavior of this method was changed in version 3.03. Prior to version 3.03 this method returned just the lines available from the next read. To get that old behavior, use the optional named parameter All and set $boolean to
""
or0
.If only eof is read then an empty list is returned. On time-out or other failures, the error mode action is performed. Use
eof()
to distinguish between reading only eof or an error occurring when the error mode is not set to"die"
.Optional named parameters are provided to override the current settings of binmode, errmode, input_record_separator, rs, telnetmode, and timeout. Rs is synonymous with input_record_separator.
- host - name of remote host
-
$host = $obj->host; $prev = $obj->host($host);
This method designates the remote host for
open()
. With no argument it returns the current host name set in the object. With an argument it sets the current host name to $host and returns the previous host name. You may indicate the remote host using either a hostname or an IP address.The default value is
"localhost"
. It may also be set byopen()
ornew()
.
- input_log - log all input
-
$fh = $obj->input_log; $fh = $obj->input_log($fh); $fh = $obj->input_log($filename);
This method starts or stops logging of input. This is useful when debugging. Also see
dump_log()
. Because most command interpreters echo back commands received, it's likely all your output will also be in this log. Note that input logging occurs after newline translation. Seebinmode()
for details on newline translation.If no argument is given, the log filehandle is returned. An empty string indicates logging is off.
To stop logging, use an empty string as an argument.
If an open filehandle is given, it is used for logging and returned. Otherwise, the argument is assumed to be the name of a file, the file is opened for logging and a filehandle to it is returned. If the file can't be opened for writing, the error mode action is performed.
- input_record_separator - input line delimiter
-
$chars = $obj->input_record_separator; $prev = $obj->input_record_separator($chars);
This method designates the line delimiter for input. It's used with
getline()
,getlines()
, andcmd()
to determine lines in the input.With no argument this method returns the current input record separator set in the object. With an argument it sets the input record separator to $chars and returns the previous value. Note that $chars must have length.
A warning is printed to STDERR when attempting to set this attribute to a string with no length.
- last_prompt - last prompt read
-
$string = $obj->last_prompt; $prev = $obj->last_prompt($string);
With no argument this method returns the last prompt read by cmd() or login(). See
prompt()
. With an argument it sets the last prompt read to $string and returns the previous value. Normally, only internal methods set the last prompt.
- lastline - last line read
-
$line = $obj->lastline; $prev = $obj->lastline($line);
This method retrieves the last line read from the object. This may be a useful error message when the remote side abnormally closes the connection. Typically the remote side will print an error message before closing.
With no argument this method returns the last line read from the object. With an argument it sets the last line read to $line and returns the previous value. Normally, only internal methods set the last line.
- login - perform standard login
-
$ok = $obj->login($username, $password); $ok = $obj->login(Name => $username, Password => $password, [Errmode => $mode,] [Prompt => $match,] [Timeout => $secs,]);
This method performs a standard login by waiting for a login prompt and responding with $username, then waiting for the password prompt and responding with $password, and then waiting for the command interpreter prompt. If any of those prompts sent by the remote side don't match what's expected, this method will time-out, unless timeout is turned off.
Login prompt must match either of these case insensitive patterns:
/login[: ]*$/i /username[: ]*$/i
Password prompt must match this case insensitive pattern:
/password[: ]*$/i
The command interpreter prompt must match the current setting of prompt. See
prompt()
.Use
dump_log()
to debug when this method keeps timing-out and you don't think it should.Consider using a combination of
print()
andwaitfor()
as an alternative to this method when it doesn't do what you want, e.g. the remote host doesn't prompt for a username.On success,
1
is returned. On time out, eof, or other failures, the error mode action is performed. Seeerrmode()
.Optional named parameters are provided to override the current settings of errmode, prompt, and timeout.
- max_buffer_length - maximum size of input buffer
-
$len = $obj->max_buffer_length; $prev = $obj->max_buffer_length($len);
This method designates the maximum size of the input buffer. An error is generated when a read causes the buffer to exceed this limit. The default value is 1,048,576 bytes (1MB). The input buffer can grow much larger than the block size when you continuously read using
getline()
orwaitfor()
and the data stream contains no newlines or matching waitfor patterns.With no argument, this method returns the current maximum buffer length set in the object. With an argument it sets the maximum buffer length to $len and returns the previous value. Values of $len smaller than 512 will be adjusted to 512.
A warning is printed to STDERR when attempting to set this attribute to something that isn't a positive integer.
- ofs - field separator for print
-
$chars = $obj->ofs $prev = $obj->ofs($chars);
This method is synonymous with
output_field_separator()
.
- open - connect to port on remote host
-
$ok = $obj->open($host); $ok = $obj->open([Host => $host,] [Port => $port,] [Errmode => $mode,] [Timeout => $secs,]);
This method opens a TCP connection to $port on $host. If either argument is missing then the current value of
host()
orport()
is used. Optional named parameters are provided to override the current setting of errmode and timeout.On success
1
is returned. On time-out or other connection failures, the error mode action is performed. Seeerrmode()
.Time-outs don't work for this method on machines that don't implement SIGALRM - most notably MS-Windows machines. For those machines, an error is returned when the system reaches its own time-out while trying to connect.
A side effect of this method is to reset the alarm interval associated with SIGALRM.
- option_accept - indicate willingness to accept a TELNET option
-
$fh = $obj->option_accept([Do => $telopt,] [Dont => $telopt,] [Will => $telopt,] [Wont => $telopt,]);
This method is used to indicate whether to accept or reject an offer to enable a TELNET option made by the remote side. If you're using Do or Will to indicate a willingness to enable, then a notification callback must have already been defined by a prior call to
option_callback()
. Seeoption_callback()
for details on receiving enable/disable notification of a TELNET option.You can give multiple Do, Dont, Will, or Wont arguments for different TELNET options in the same call to this method.
The following example describes the meaning of the named parameters. A TELNET option, such as
TELOPT_ECHO
used below, is an integer constant that you can import from Net::Telnet. See the source in file Telnet.pm for the complete list.Do =>
TELOPT_ECHO
we'll accept an offer to enable the echo option on the local side
Dont =>
TELOPT_ECHO
we'll reject an offer to enable the echo option on the local side
Will =>
TELOPT_ECHO
we'll accept an offer to enable the echo option on the remote side
Wont =>
TELOPT_ECHO
we'll reject an offer to enable the echo option on the remote side
-
Use
option_send()
to send a request to the remote side to enable or disable a particular TELNET option.
- option_callback - define the option negotiation callback
-
$coderef = $obj->option_callback; $prev = $obj->option_callback($coderef);
This method defines the callback subroutine that's called when a TELNET option is enabled or disabled. Once defined, the option_callback may not be undefined. However, calling this method with a different $coderef changes it.
A warning is printed to STDERR when attempting to set this attribute to something that isn't a coderef.
Here are the circumstances that invoke $coderef:
An option becomes enabled because the remote side requested an enable and
option_accept()
had been used to arrange that it be accepted.The remote side arbitrarily decides to disable an option that is currently enabled. Note that Net::Telnet always accepts a request to disable from the remote side.
option_send()
was used to send a request to enable or disable an option and the response from the remote side has just been received. Note, that if a request to enable is rejected then $coderef is still invoked even though the option didn't change.
-
Here are the arguments passed to &$coderef:
&$coderef($obj, $option, $is_remote, $is_enabled, $was_enabled, $buf_position);
1. $obj is the Net::Telnet object
2. $option is the TELNET option. Net::Telnet exports constants for the various TELNET options which just equate to an integer.
3. $is_remote is a boolean indicating for which side the option applies.
4. $is_enabled is a boolean indicating the option is enabled or disabled
5. $was_enabled is a boolean indicating the option was previously enabled or disabled
6. $buf_position is an integer indicating the position in the object's input buffer where the option takes effect. See
buffer()
to access the object's input buffer.
- option_log - log all TELNET options sent or received
-
$fh = $obj->option_log; $fh = $obj->option_log($fh); $fh = $obj->option_log($filename);
This method starts or stops logging of all TELNET options being sent or received. This is useful for debugging when you send options via
option_send()
or you arrange to accept option requests from the remote side viaoption_accept()
. Also seedump_log()
.If no argument is given, the log filehandle is returned. An empty string indicates logging is off.
To stop logging, use an empty string as an argument.
If an open filehandle is given, it is used for logging and returned. Otherwise, the argument is assumed to be the name of a file, the file is opened for logging and a filehandle to it is returned. If the file can't be opened for writing, the error mode action is performed.
- option_send - send TELNET option negotiation request
-
$ok = $obj->option_send([Do => $telopt,] [Dont => $telopt,] [Will => $telopt,] [Wont => $telopt,] [Async => $boolean,]);
This method is not yet implemented. Look for it in a future version.
- option_state - get current state of a TELNET option
-
$hashref = $obj->option_state($telopt);
This method returns a hashref containing a copy of the current state of TELNET option $telopt.
Here are the values returned in the hash:
$hashref->{remote_enabled}
boolean that indicates if the option is enabled on the remote side.
$hashref->{remote_enable_ok}
boolean that indicates if it's ok to accept an offer to enable this option on the remote side.
$hashref->{remote_state}
string used to hold the internal state of option negotiation for this option on the remote side.
$hashref->{local_enabled}
boolean that indicates if the option is enabled on the local side.
$hashref->{local_enable_ok}
boolean that indicates if it's ok to accept an offer to enable this option on the local side.
$hashref->{local_state}
string used to hold the internal state of option negotiation for this option on the local side.
- ors - output line delimiter
-
$chars = $obj->ors; $prev = $obj->ors($chars);
This method is synonymous with
output_record_separator()
.
- output_field_separator - field separator for print
-
$chars = $obj->output_field_separator; $prev = $obj->output_field_separator($chars);
This method designates the output field separator for
print()
. Ordinarily the print method simply prints out the comma separated fields you specify. Set this to specify what's printed between fields.With no argument this method returns the current output field separator set in the object. With an argument it sets the output field separator to $chars and returns the previous value.
By default it's set to an empty string.
- output_log - log all output
-
$fh = $obj->output_log; $fh = $obj->output_log($fh); $fh = $obj->output_log($filename);
This method starts or stops logging of output. This is useful when debugging. Also see
dump_log()
. Because most command interpreters echo back commands received, it's likely all your output would also be in an input log. Seeinput_log()
. Note that output logging occurs before newline translation. Seebinmode()
for details on newline translation.If no argument is given, the log filehandle is returned. An empty string indicates logging is off.
To stop logging, use an empty string as an argument.
If an open filehandle is given, it is used for logging and returned. Otherwise, the argument is assumed to be the name of a file, the file is opened for logging and a filehandle to it is returned. If the file can't be opened for writing, the error mode action is performed.
- output_record_separator - output line delimiter
-
$chars = $obj->output_record_separator; $prev = $obj->output_record_separator($chars);
This method designates the output line delimiter for
print()
andcmd()
. Set this to specify what's printed at the end ofprint()
andcmd()
.The output record separator is set to
"\n"
by default, so there's no need to append all your commands with a newline. To avoid printing the output_record_separator useput()
or set the output_record_separator to an empty string.With no argument this method returns the current output record separator set in the object. With an argument it sets the output record separator to $chars and returns the previous value.
- port - remote port
-
$port = $obj->port; $prev = $obj->port($port);
This method designates the remote TCP port. With no argument this method returns the current port number. With an argument it sets the current port number to $port and returns the previous port. If $port is a TCP service name, then it's first converted to a port number using the perl function
getservbyname()
.The default value is
23
. It may also be set byopen()
ornew()
.A warning is printed to STDERR when attempting to set this attribute to something that's not a positive integer or a valid TCP service name.
- print - write to object
-
$ok = $obj->print(@list);
This method writes @list followed by the output_record_separator to the open object and returns
1
if all data was successfully written. On time-out or other failures, the error mode action is performed. Seeerrmode()
.By default, the
output_record_separator()
is set to"\n"
so all your commands automatically end with a newline. In most cases your output is being read by a command interpreter which won't accept a command until newline is read. This is similar to someone typing a command and hitting the return key. To avoid printing a trailing"\n"
useput()
instead or set the output_record_separator to an empty string.On failure, it's possible that some data was written. If you choose to try and recover from a print timing-out, use
print_length()
to determine how much was written before the error occurred.You may also use the output field separator to print a string between the list elements. See
output_field_separator()
.
- print_length - number of bytes written by print
-
$num = $obj->print_length;
This returns the number of bytes successfully written by the most recent
print()
orput()
.
- prompt - pattern to match a prompt
-
$matchop = $obj->prompt; $prev = $obj->prompt($matchop);
This method sets the pattern used to find a prompt in the input stream. It must be a string representing a valid perl pattern match operator. The methods
login()
andcmd()
try to read until matching the prompt. They will fail with a time-out error if the pattern you've chosen doesn't match what the remote side sends.With no argument this method returns the prompt set in the object. With an argument it sets the prompt to $matchop and returns the previous value.
The default prompt is
'/[\$%#>] $/'
Always use single quotes, instead of double quotes, to construct $matchop (e.g.
'/bash\$ $/'
). If you're constructing a DOS like file path, you'll need to use four backslashes to represent one (e.g.'/c:\\\\users\\\\bill>$/i'
).Of course don't forget about regexp metacharacters like
.
,[
, or$
. You'll only need a single backslash to quote them. The anchor metacharacters^
and$
refer to positions in the input buffer.A warning is printed to STDERR when attempting to set this attribute with a match operator missing its opening delimiter.
- put - write to object
-
$ok = $obj->put($string); $ok = $obj->put(String => $string, [Binmode => $mode,] [Errmode => $errmode,] [Telnetmode => $mode,] [Timeout => $secs,]);
This method writes $string to the opened object and returns
1
if all data was successfully written. This method is likeprint()
except that it doesn't write the trailing output_record_separator ("\n" by default). On time-out or other failures, the error mode action is performed. Seeerrmode()
.On failure, it's possible that some data was written. If you choose to try and recover from a put timing-out, use
print_length()
to determine how much was written before the error occurred.Optional named parameters are provided to override the current settings of binmode, errmode, telnetmode, and timeout.
- rs - input line delimiter
-
$chars = $obj->rs; $prev = $obj->rs($chars);
This method is synonymous with
input_record_separator()
.
- telnetmode - turn off/on telnet command interpretation
-
$mode = $obj->telnetmode; $prev = $obj->telnetmode($mode);
This method controls whether or not TELNET commands in the data stream are recognized and handled. The TELNET protocol uses certain character sequences sent in the data stream to control the session. If the port you're connecting to isn't using the TELNET protocol, then you should turn this mode off. The default is on.
If no argument is given, the current mode is returned.
If $mode is
0
then telnet mode is off. If $mode is1
then telnet mode is on.
- timed_out - time-out indicator
-
$boolean = $obj->timed_out; $prev = $obj->timed_out($boolean);
This method indicates if a previous read, write, or open method timed-out. Remember that timing-out is itself an error. To be able to invoke
timed_out()
after a time-out error, you'd have to change the default error mode to something other than"die"
. Seeerrmode()
.With no argument this method returns
1
if the previous method timed-out. With an argument it sets the indicator. Normally, only internal methods set this indicator.
- timeout - I/O time-out interval
-
$secs = $obj->timeout; $prev = $obj->timeout($secs);
This method sets the timeout interval that's used when performing I/O or connecting to a port. When a method doesn't complete within the timeout interval then it's an error and the error mode action is performed.
A timeout may be expressed as a relative or absolute value. If $secs is greater than or equal to the time the program started, as determined by $^T, then it's an absolute time value for when time-out occurs. The perl function
time()
may be used to obtain an absolute time value. For a relative time-out value less than $^T, time-out happens $secs from when the method begins.If $secs is
0
then time-out occurs if the data cannot be immediately read or written. Use the undefined value to turn off timing-out completely.With no argument this method returns the timeout set in the object. With an argument it sets the timeout to $secs and returns the previous value. The default timeout value is
10
seconds.A warning is printed to STDERR when attempting to set this attribute to something that's not an
undef
or a non-negative integer.
- waitfor - wait for pattern in the input
-
$ok = $obj->waitfor($matchop); $ok = $obj->waitfor([Match => $matchop,] [String => $string,] [Binmode => $mode,] [Errmode => $errmode,] [Telnetmode => $mode,] [Timeout => $secs,]); ($prematch, $match) = $obj->waitfor($matchop); ($prematch, $match) = $obj->waitfor([Match => $matchop,] [String => $string,] [Binmode => $mode,] [Errmode => $errmode,] [Telnetmode => $mode,] [Timeout => $secs,]);
This method reads until a pattern match or string is found in the input stream. All the characters before and including the match are removed from the input stream.
In a list context the characters before the match and the matched characters are returned in $prematch and $match. In a scalar context, the matched characters and all characters before it are discarded and
1
is returned on success. On time-out, eof, or other failures, for both list and scalar context, the error mode action is performed. Seeerrmode()
.You can specify more than one pattern or string by simply providing multiple Match and/or String named parameters. A $matchop must be a string representing a valid Perl pattern match operator. The $string is just a substring to find in the input stream.
Use
dump_log()
to debug when this method keeps timing-out and you don't think it should.An optional named parameter is provided to override the current setting of timeout.
To avoid unexpected backslash interpretation, always use single quotes instead of double quotes to construct a match operator argument for
prompt()
andwaitfor()
(e.g.'/bash\$ $/'
). If you're constructing a DOS like file path, you'll need to use four backslashes to represent one (e.g.'/c:\\\\users\\\\bill>$/i'
).Of course don't forget about regexp metacharacters like
.
,[
, or$
. You'll only need a single backslash to quote them. The anchor metacharacters^
and$
refer to positions in the input buffer.Optional named parameters are provided to override the current settings of binmode, errmode, telnetmode, and timeout.
SEE ALSO
- RFC 854
-
TELNET Protocol Specification
ftp://ftp.isi.edu/in-notes/rfc854.txt
- RFC 1143
-
Q Method of Implementing TELNET Option Negotiation
ftp://ftp.isi.edu/in-notes/rfc1143.txt
- TELNET Option Assignments
-
http://www.iana.org/assignments/telnet-options
EXAMPLES
This example gets the current weather forecast for Brainerd, Minnesota.
my ($forecast, $t);
use Net::Telnet ();
$t = new Net::Telnet;
$t->open("rainmaker.wunderground.com");
## Wait for first prompt and "hit return".
$t->waitfor('/continue:.*$/');
$t->print("");
## Wait for second prompt and respond with city code.
$t->waitfor('/city code.*$/');
$t->print("BRD");
## Read and print the first page of forecast.
($forecast) = $t->waitfor('/[ \t]+press return to continue/i');
print $forecast;
exit;
This example checks a POP server to see if you have mail.
my ($hostname, $line, $passwd, $pop, $username);
$hostname = "your_destination_host_here";
$username = "your_username_here";
$passwd = "your_password_here";
use Net::Telnet ();
$pop = new Net::Telnet (Telnetmode => 0);
$pop->open(Host => $hostname,
Port => 110);
## Read connection message.
$line = $pop->getline;
die $line unless $line =~ /^\+OK/;
## Send user name.
$pop->print("user $username");
$line = $pop->getline;
die $line unless $line =~ /^\+OK/;
## Send password.
$pop->print("pass $passwd");
$line = $pop->getline;
die $line unless $line =~ /^\+OK/;
## Request status of messages.
$pop->print("list");
$line = $pop->getline;
print $line;
exit;
Here's an example that uses the ssh program to connect to a remote host. Because the ssh program reads and writes to its controlling terminal, the IO::Pty module is used to create a new pseudo terminal for use by ssh. A new Net::Telnet object is then created to read and write to that pseudo terminal. To use the code below, substitute "changeme" with the actual host, user, password, and command prompt.
## Main program.
{
my ($pty, $ssh, @lines);
my $host = "changeme";
my $user = "changeme";
my $password = "changeme";
my $prompt = '/changeme:~> $/';
## Start ssh program.
$pty = &spawn("ssh", "-l", $user, $host); # spawn() defined below
## Create a Net::Telnet object to perform I/O on ssh's tty.
use Net::Telnet;
$ssh = new Net::Telnet (-fhopen => $pty,
-prompt => $prompt,
-telnetmode => 0,
-cmd_remove_mode => 1,
-output_record_separator => "\r");
## Login to remote host.
$ssh->waitfor(-match => '/password: ?$/i',
-errmode => "return")
or die "problem connecting to host: ", $ssh->lastline;
$ssh->print($password);
$ssh->waitfor(-match => $ssh->prompt,
-errmode => "return")
or die "login failed: ", $ssh->lastline;
## Send command, get and print its output.
@lines = $ssh->cmd("who");
print @lines;
exit;
} # end main program
sub spawn {
my(@cmd) = @_;
my($pid, $pty, $tty, $tty_fd);
## Create a new pseudo terminal.
use IO::Pty ();
$pty = new IO::Pty
or die $!;
## Execute the program in another process.
unless ($pid = fork) { # child process
die "problem spawning program: $!\n" unless defined $pid;
## Disassociate process from existing controlling terminal.
use POSIX ();
POSIX::setsid
or die "setsid failed: $!";
## Associate process with a new controlling terminal.
$tty = $pty->slave;
$tty_fd = $tty->fileno;
close $pty;
## Make stdio use the new controlling terminal.
open STDIN, "<&$tty_fd" or die $!;
open STDOUT, ">&$tty_fd" or die $!;
open STDERR, ">&STDOUT" or die $!;
close $tty;
## Execute requested program.
exec @cmd
or die "problem executing $cmd[0]\n";
} # end child process
$pty;
} # end sub spawn
Here's an example that changes a user's login password. Because the passwd program always prompts for passwords on its controlling terminal, the IO::Pty module is used to create a new pseudo terminal for use by passwd. A new Net::Telnet object is then created to read and write to that pseudo terminal. To use the code below, substitute "changeme" with the actual old and new passwords.
my ($pty, $passwd);
my $oldpw = "changeme";
my $newpw = "changeme";
## Start passwd program.
$pty = &spawn("passwd"); # spawn() defined above
## Create a Net::Telnet object to perform I/O on passwd's tty.
use Net::Telnet;
$passwd = new Net::Telnet (-fhopen => $pty,
-timeout => 2,
-output_record_separator => "\r",
-telnetmode => 0,
-cmd_remove_mode => 1);
$passwd->errmode("return");
## Send existing password.
$passwd->waitfor('/password: ?$/i')
or die "no old password prompt: ", $passwd->lastline;
$passwd->print($oldpw);
## Send new password.
$passwd->waitfor('/new password: ?$/i')
or die "bad old password: ", $passwd->lastline;
$passwd->print($newpw);
## Send new password verification.
$passwd->waitfor('/new password: ?$/i')
or die "bad new password: ", $passwd->lastline;
$passwd->print($newpw);
## Display success or failure.
$passwd->waitfor('/changed/')
or die "bad new password: ", $passwd->lastline;
print $passwd->lastline;
$passwd->close;
exit;
Here's an example you can use to down load a file of any type. The file is read from the remote host's standard output using cat. To prevent any output processing, the remote host's standard output is put in raw mode using the Bourne shell. The Bourne shell is used because some shells, notably tcsh, prevent changing tty modes. Upon completion, FTP style statistics are printed to stderr.
my ($block, $filename, $host, $hostname, $k_per_sec, $line,
$num_read, $passwd, $prevblock, $prompt, $size, $size_bsd,
$size_sysv, $start_time, $total_time, $username);
$hostname = "your_destination_host_here";
$username = "your_username_here";
$passwd = "your_password_here";
$filename = "your_download_file_here";
## Connect and login.
use Net::Telnet ();
$host = new Net::Telnet (Timeout => 30,
Prompt => '/[%#>] $/');
$host->open($hostname);
$host->login($username, $passwd);
## Make sure prompt won't match anything in send data.
$prompt = "_funkyPrompt_";
$host->prompt("/$prompt\$/");
$host->cmd("set prompt = '$prompt'");
## Get size of file.
($line) = $host->cmd("/bin/ls -l $filename");
($size_bsd, $size_sysv) = (split ' ', $line)[3,4];
if ($size_sysv =~ /^\d+$/) {
$size = $size_sysv;
}
elsif ($size_bsd =~ /^\d+$/) {
$size = $size_bsd;
}
else {
die "$filename: no such file on $hostname";
}
## Start sending the file.
binmode STDOUT;
$host->binmode(1);
$host->print("/bin/sh -c 'stty raw; cat $filename'");
$host->getline; # discard echoed back line
## Read file a block at a time.
$num_read = 0;
$prevblock = "";
$start_time = time;
while (($block = $host->get) and ($block !~ /$prompt$/o)) {
if (length $block >= length $prompt) {
print $prevblock;
$num_read += length $prevblock;
$prevblock = $block;
}
else {
$prevblock .= $block;
}
}
$host->close;
## Print last block without trailing prompt.
$prevblock .= $block;
$prevblock =~ s/$prompt$//;
print $prevblock;
$num_read += length $prevblock;
die "error: expected size $size, received size $num_read\n"
unless $num_read == $size;
## Print totals.
$total_time = (time - $start_time) || 1;
$k_per_sec = ($size / 1024) / $total_time;
$k_per_sec = sprintf "%3.1f", $k_per_sec;
warn("$num_read bytes received in $total_time seconds ",
"($k_per_sec Kbytes/s)\n");
exit;
AUTHOR
Jay Rogers <jay@rgrs.com>
COPYRIGHT
Copyright 1997, 2000, 2002 by Jay Rogers. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
2 POD Errors
The following errors were encountered while parsing the POD:
- Around line 4356:
Expected text after =item, not a bullet
- Around line 4404:
Expected text after =item, not a bullet