NAME

Graphics::GnuplotIF - A dynamic Perl interface to gnuplot

VERSION

This documentation refers to Graphics::GnuplotIF version 1.4

SYNOPSIS

  use Graphics::GnuplotIF qw(GnuplotIF);

  my  @x  = ( -2, -1.50, -1, -0.50,  0,  0.50,  1, 1.50, 2 ); # x values
  my  @y1 = (  4,  2.25,  1,  0.25,  0,  0.25,  1, 2.25, 4 ); # function 1
  my  @y2 = (  2,  0.25, -1, -1.75, -2, -1.75, -1, 0.25, 2 ); # function 2

  my  $plot1 = Graphics::GnuplotIF->new(title => "line", style => "points");

  $plot1->gnuplot_plot_y( \@x );              # plot 9 points over 0..8

  $plot1->gnuplot_pause( );                   # hit RETURN to continue

  $plot1->gnuplot_set_title( "parabola" );    # new title
  $plot1->gnuplot_set_style( "lines" );       # new line style
  $plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 ); # rewrite plot1: y1, y2 over x

  my  $plot2  = Graphics::GnuplotIF->new;     # new plot object

  $plot2->gnuplot_set_xrange(  0, 4 );        # set x range
  $plot2->gnuplot_set_yrange( -2, 2 );        # set y range
  $plot2->gnuplot_cmd( "set grid" );          # send a gnuplot command
  $plot2->gnuplot_plot_equation(              # 3 equations in one plot
    "y1(x) = sin(x)",
    "y2(x) = cos(x)",
    "y3(x) = sin(x)/x" );

  $plot2->gnuplot_pause( );                   # hit RETURN to continue

  $plot2->gnuplot_plot_equation(              # rewrite plot 2
    "y4(x) = 2*exp(-x)*sin(4*x)" );

  $plot2->gnuplot_pause( );                   # hit RETURN to continue

  my  $plot3  = GnuplotIF;                    # new plot object

  my    @xyz    = (                           # 2-D-matrix, z-values
    [0,  1,  4,  9],
    [1,  2,  6, 15],
    [4,  6, 12, 27],
    [9, 15, 27, 54],
  );

  $plot3->gnuplot_cmd( "set grid" );          # send a gnuplot command
  $plot3->gnuplot_set_plot_titles("surface"); # set legend
  $plot3->gnuplot_plot_3d( \@xyz );           # start 3-D-plot
  $plot3->gnuplot_pause( );                   # hit RETURN to continue

DESCRIPTION

Graphics::GnuplotIF is a simple and easy to use dynamic Perl interface to gnuplot. gnuplot is a freely available, command-driven graphical display tool for Unix. It compiles and works quite well on a number of Unix flavours as well as other operating systems.

This module enables sending display requests asynchronously to gnuplot through simple Perl subroutine calls.

A gnuplot session is an instance of class Graphics::GnuplotIF. The constructor starts gnuplot as a separate process for each session. The plot commands are send through a pipe. The graphical output from gnuplot will be displayed immediately.

Several independent plots can be started from one script. Each plot has its own pipe. All pipes will be closed automatically by the destructor when the script terminates. The gnuplot processes terminate when the corresponding pipes are closed. Their graphical output will now disappear (but see parameter persist).

Graphics::GnuplotIF is similar to gnuplot_i , a C interface to gnuplot ( http://ndevilla.free.fr/gnuplot/ ), and to gnuplot_i++ , a C++ interface to gnuplot ( http://jijo.cjb.net/code/cc++ ).

SUBROUTINES/METHODS

An object of this class represents an interface to a running gnuplot process. During the creation of an object such an process will be started for each such object. Communication is done through an unidirectional pipe; the resulting stream is write-only.

new

The constructor creates a new gnuplot session object, referenced by a handle:

  $plot1  = Graphics::GnuplotIF->new( );

A few named arguments can be passed as key - value pairs (here shown with their default values):

  style        => 'lines', # one of the gnuplot line styles (see below)
  title        => '',      # string
  xlabel       => 'x',     # string
  ylabel       => 'y',     # string
  xrange       => [],      # array reference; autoscaling, if empty
  xrange       => [],      # array reference; autoscaling, if empty
  plot_titles  => [],      # array of strings; titles used in the legend
  scriptfile   => '',      # write all plot commands to the specified file
  persist      => 0,       # let plot windows survive after gnuplot exits
                           # 0 : close / 1 : survive
  objectname   => '',      # an optional name for the object
  silent_pause => 1,       # 0 suppress message from gnuplot_pause()

These attributes are stored in each object.

Allowed line styles are

  boxes     dots   filledcurves  fsteps  histeps
  impulses  lines  linespoints   points  steps

The generated gnuplot commands can be stored to a file instead of beeing executed immediately. This file can be used as input to gnuplot, e.g.

  gnuplot < function_set_1.gnuplot

A script file can also be used for checking the commands send to gnuplot.

The objects are automatically deleted by a destructor. The destructor closes the pipe to the gnuplot process belonging to that object. The gnuplot process will also terminate and remove the graphic output. The termination can be controlled by the method gnuplot_pause .

GnuplotIF

The short form of the constructor above (new):

  use Graphics::GnuplotIF qw(GnuplotIF);

  $plot1  = GnuplotIF;

This subroutine is exported only on request.

gnuplot_plot_y

  $plot1->gnuplot_plot_y( \@y1, \@y2 );

gnuplot_plot_y takes one or more array references and plots the values over the x-values 0, 1, 2, 3, ...

gnuplot_plot_xy

  $plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );

gnuplot_plot_xy takes two or more array references. The first array is assumed to contain the x-values for the following function values.

gnuplot_plot_xy_style

  %y1 = ( 'y_values' => \@y1, 'style_spec' => "lines lw 3" );
  %y2 = ( 'y_values' => \@y2, 
          'style_spec' => "points pointtype 4 pointsize 5" );

  $plot1->gnuplot_plot_xy_style( \@x, \%y1, \%y2 );

gnuplot_plot_xy_style takes one array reference and one or more hash references. The first array is assumed to contain the x-values for the following function values. The following hashes are assumed to contain pairs of y-values and individual style specifications for use in the plot command. The 'style_spec' settings are placed between with and title of gnuplot's plot command.

gnuplot_plot_equation

  $plot2->gnuplot_plot_equation(         # 3 equations in one plot
    "y1(x) = sin(x)",
    "y2(x) = cos(x)",
    "y3(x) = sin(x)/x" );

gnuplot_plot_equation takes one or more gnuplot function descriptions as strings. The plot ranges can be controlled by gnuplot_set_xrange and gnuplot_set_yrange .

gnuplot_plot_3d

  $plot2->gnuplot_plot_3d( \@array );    # 3-D-plot

gnuplot_plot_3d takes one reference to an 2-D-array of z-values.

gnuplot_pause

  $plot1->gnuplot_pause( [time] [,text] );

This is an emulation of the gnuplot pause command. It displays any text associated with the command and waits a specified amount of time or until the carriage return is pressed. The message can be suppressed by

  silent_pause => 0

given to the constructor (see new ).

time may be any constant or expression. Choosing -1 (default) will wait until a carriage return is hit, zero (0) won't pause at all, and a positive number will wait the specified number of seconds.

The time value and the text are stored in the object and reused. A sequence like

  $plot1->gnuplot_pause( 5.5 );          # delay is 5.5 seconds
  $plot1->gnuplot_plot_y( \@y1 );

  $plot1->gnuplot_pause( );
  $plot1->gnuplot_plot_y( \@y2 );

  $plot1->gnuplot_pause( );
  $plot1->gnuplot_plot_y( \@y3 );

  $plot1->gnuplot_pause( -1 );

will display 3 plots with 5 seconds delay and wait for a final carriage return.

gnuplot_cmd

  $plot2->gnuplot_cmd( 'set grid',
                       'set timestamp "%d/%m/%y %H:%M" 0,0 "Helvetica"'
                       );

gnuplot_cmd can be used to send one or more gnuplot commands, especially those not wrapped by a Graphics::GnuplotIF method.

gnuplot_reset

  $plot1->gnuplot_reset();

Set all options set with the set command to their gnuplot default values.

gnuplot_set_style

  $plot1->gnuplot_set_style( "steps" );   # new line style

Sets one of the allowed line styles (see new ) in a plot command.

gnuplot_set_title

  $plot1->gnuplot_set_title("parabola");  # new title

Sets the plot title. Equivalent to the gnuplot command set title "parabola".

gnuplot_set_xlabel

  $plot1->gnuplot_set_xlabel("time (days)");

Sets the x axis label. Equivalent to the gnuplot command set xlabel "time (days)".

gnuplot_set_ylabel

  $plot1->gnuplot_set_ylabel("bugs fixed");

Sets the y axis label. Equivalent to the gnuplot command set ylabel "bugs fixed".

gnuplot_set_xrange

  $plot1->gnuplot_set_xrange( left, right );

Sets the horizontal range that will be displayed. Equivalent to the gnuplot command set xrange [left:right].

gnuplot_set_yrange

  $plot1->gnuplot_set_yrange( low, high );

Sets the vertical range that will be displayed. Equivalent to the gnuplot command set yrange [low:high].

gnuplot_set_plot_titles

  $plot1->gnuplot_set_plot_titles( @ytitles );

Sets the list of titles used in the key for each of the y-coordinate data sets specified in subsequent calls to gnuplot_plot_xy or gnuplot_plot_y commands. This is not equivalent to a complete gnuplot command; rather it adds a title clause to each data set specified in a gnuplot plot command.

gnuplot_hardcopy

gnuplot_cmd can be used to write a plot into a file or make a printable file by setting/resetting the terminal and the output file:

  $plot1->gnuplot_hardcopy( 'function1.gnuplot.ps', 
                            'postscript', 
                            'color lw 3' );

  $plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );

  $plot1->gnuplot_restore_terminal();

The 1. parameter is a file name, the 2. parameter is a gnuplot terminal type, the 3. parameter is a string with additional terminal parameters (optional). The current terminal settings will be saved.

gnuplot_restore_terminal

Restores the saved terminal settings after a call to gnuplot_hardcopy(). Output will go to STDOUT again.

Print a plot directly

A hardcopy can be made with an appropriate output format and a pipe to a printer:

  $plot1->gnuplot_cmd( 'set terminal postscript',
                       'set output   " | lpr " ' );

  $plot1->gnuplot_plot_xy( \@x, \@y1, \@y2 );

  $plot1->gnuplot_cmd( 'set output',
                       'set terminal x11' );

gnuplot_get_object_id

Get the (internal) object number (and the object name):

   $obj_number              = $plot1->gnuplot_get_object_id();
  ($obj_number, $obj_name)  = $plot1->gnuplot_get_object_id();

The object number is set automatically by the constructor. The object name can be set by the constructor (objectname => 'MyName').

gnuplot_get_plotnumber

Get the (internal) plot number of the next plot:

   $plot_number             = $plot1->gnuplot_get_plotnumber()

The plot number is set automatically by the constructor starting with 1. Each call to

  gnuplot_plot_y
  gnuplot_plot_xy
  gnuplot_plot_xy_style
  gnuplot_plot_equation
  gnuplot_plot_3d

increments this number by 1. This can be used to identify single plots, e.g. with

  $plot->gnuplot_cmd( "set timestamp \"plot number ${plot_number} / %c\"" );

EXPORTS

GnuplotIF constructor, short form (see GnuplotIF ).

DIAGNOSTICS

Dialog messages and diagnostic messages start with Graphics::GnuplotIF (object NR): ... .

NR is the number of the corresponding Graphics::GnuplotIF object and output stream. NR counts the objects in the order of their generation.

The gnuplot messages going to STDERR will be redirected to the file .gnuplot.stderr.log.

CONFIGURATION AND ENVIRONMENT

The environment variable DISPLAY is checked for the display.

DEPENDENCIES

gnuplot ( http://sourceforge.net/projects/gnuplot ) must be installed.
The module Carp is used for error handling.
The module IO::Handle is used to handle output pipes. Your operating system must support pipes, of course.

INCOMPATIBILITIES

There are no known incompatibilities.

BUGS AND LIMITATIONS

  $plot1->gnuplot_cmd("pause -1");     # send the gnuplot pause command

does not work. Use

  $plot1->gnuplot_pause( );

There are no known bugs in this module. Please report problems to author. Patches are welcome.

AUTHOR

Dr.-Ing. Fritz Mehner (mehner@fh-swf.de)

CREDITS

Stephen Marshall (smarshall at wsi.com) contributed gnuplot_set_plot_titles.

Georg Bauhaus (bauhaus at futureapps.de) contributed gnuplot_plot_xy_style.

LICENSE AND COPYRIGHT

This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perldoc perlartistic. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

	Global
`s`	Focus search bar
`?`	Bring up this help dialog

	GitHub
`g` `p`	Go to pull requests
`g` `i`	go to github issues (only if github is preferred repository)

	POD
`g` `a`	Go to author
`g` `c`	Go to changes
`g` `i`	Go to issues
`g` `d`	Go to dist
`g` `r`	Go to repository/SCM
`g` `s`	Go to source
`g` `b`	Go to file browse

	Search terms
module: (e.g. module:Plugin)
distribution: (e.g. distribution:Dancer auth)
author: (e.g. author:SONGMU Redis)
version: (e.g. version:1.00)