NAME

Chart::Plotly::Trace::Scatter3d::Marker - This attribute is one of the possible options for the trace scatter3d.

VERSION

version 0.042

SYNOPSIS

 use Chart::Plotly qw(show_plot);
 use Chart::Plotly::Trace::Scatter3d;
 use English qw(-no_match_vars);
 use Const::Fast;
 
 const my $PI => 4 * atan2( 1, 1 );
 const my $DELTA => 0.1;
 my ( @x, @y, @z );
 for ( my $u = 0; $u <= 2 * $PI; $u += $DELTA ) {
     for ( my $v = -1; $v < 1; $v += $DELTA ) {
         push @x, ( 1 + ( $v / 2 ) * cos( $u / 2 ) ) * cos($u);
         push @y, ( 1 + ( $v / 2 ) * cos( $u / 2 ) ) * sin($u);
         push @z, ( $v / 2 ) * sin( $u / 2 );
     }
 }
 my $scatter3d = Chart::Plotly::Trace::Scatter3d->new( x => \@x, y => \@y, z => \@z, mode => 'lines' );
 
 show_plot( [$scatter3d] );

DESCRIPTION

This attribute is part of the possible options for the trace scatter3d.

This file has been autogenerated from the official plotly.js source.

If you like Plotly, please support them: https://plot.ly/ Open source announcement: https://plot.ly/javascript/open-source-announcement/

Full reference: https://plot.ly/javascript/reference/#scatter3d

DISCLAIMER

This is an unofficial Plotly Perl module. Currently I'm not affiliated in any way with Plotly. But I think plotly.js is a great library and I want to use it with perl.

METHODS

TO_JSON

Serialize the trace to JSON. This method should be called only by JSON serializer.

ATTRIBUTES

• autocolorscale

  Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.colorscale`. Has an effect only if in `marker.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

• cauto

  Determines whether or not the color domain is computed with respect to the input data (here in `marker.color`) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if in `marker.color` is set to a numerical array. Defaults to `false` when `marker.cmin` and `marker.cmax` are set by the user.

• cmax

  Sets the upper bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmin` must be set as well.

• cmid

  Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color`. Has no effect when `marker.cauto` is `false`.

• cmin

  Sets the lower bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmax` must be set as well.

• color

  Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.cmin` and `marker.cmax` if set.

• coloraxis

  Sets a reference to a shared color axis. References to these shared color axes are *coloraxis*, *coloraxis2*, *coloraxis3*, etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

• colorbar

• colorscale

  Sets the colorscale. Has an effect only if in `marker.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

• colorsrc

  Sets the source reference on Chart Studio Cloud for `color`.

• line

• opacity

  Sets the marker opacity. Note that the marker opacity for scatter3d traces must be a scalar value for performance reasons. To set a blending opacity value (i.e. which is not transparent), set *marker.color* to an rgba color and use its alpha channel.

• reversescale

  Reverses the color mapping if true. Has an effect only if in `marker.color` is set to a numerical array. If true, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color.

• showscale

  Determines whether or not a colorbar is displayed for this trace. Has an effect only if in `marker.color` is set to a numerical array.

• size

  Sets the marker size (in px).

• sizemin

  Has an effect only if `marker.size` is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

• sizemode

  Has an effect only if `marker.size` is set to a numerical array. Sets the rule for which the data in `size` is converted to pixels.

• sizeref

  Has an effect only if `marker.size` is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with `sizemin` and `sizemode`.

• sizesrc

  Sets the source reference on Chart Studio Cloud for `size`.

• symbol

  Sets the marker symbol type.

• symbolsrc

  Sets the source reference on Chart Studio Cloud for `symbol`.

AUTHOR

Pablo Rodríguez González <pablo.rodriguez.gonzalez@gmail.com>

COPYRIGHT AND LICENSE

This software is Copyright (c) 2022 by Pablo Rodríguez González.

This is free software, licensed under:

  The MIT (X11) License