The London Perl and Raku Workshop takes place on 26th Oct 2024. If your company depends on Perl, please consider sponsoring and/or attending.

NAME

Test::Most - Most commonly needed test functions and features.

VERSION

Version 0.38

SYNOPSIS

Instead of this:

use strict;
use warnings;
use Test::Exception 0.88;
use Test::Differences 0.500;
use Test::Deep 0.106;
use Test::Warn 0.11;
use Test::More tests => 42;

You type this:

use Test::Most tests => 42;

DESCRIPTION

Test::Most exists to reduce boilerplate and to make your testing life easier. We provide "one stop shopping" for most commonly used testing modules. In fact, we often require the latest versions so that you get bug fixes through Test::Most and don't have to keep upgrading these modules separately.

This module provides you with the most commonly used testing functions, along with automatically turning on strict and warning and gives you a bit more fine-grained control over your test suite.

use Test::Most tests => 4, 'die';

ok 1, 'Normal calls to ok() should succeed';
is 2, 2, '... as should all passing tests';
eq_or_diff [3], [4], '... but failing tests should die';
ok 4, '... will never get to here';

As you can see, the eq_or_diff test will fail. Because 'die' is in the import list, the test program will halt at that point.

If you do not want strict and warnings enabled, you must explicitly disable them. Thus, you must be explicit about what you want and no longer need to worry about accidentally forgetting them.

use Test::Most tests => 4;
no strict;
no warnings;

EXPORT

All functions from the following modules will automatically be exported into your namespace:

Functions which are optionally exported from any of those modules must be referred to by their fully-qualified name:

Test::Deep::render_stack( $var, $stack );

FUNCTIONS

Several other functions are also automatically exported:

die_on_fail

die_on_fail;
is_deeply $foo, bar, '... we throw an exception if this fails';

This function, if called, will cause the test program to throw a Test::Most::Exception, effectively halting the test.

bail_on_fail

bail_on_fail;
is_deeply $foo, bar, '... we bail out if this fails';

This function, if called, will cause the test suite to BAIL_OUT() if any tests fail after it.

restore_fail

die_on_fail;
is_deeply $foo, bar, '... we throw an exception if this fails';

restore_fail;
cmp_bag(\@got, \@bag, '... we will not throw an exception if this fails';

This restores the original test failure behavior, so subsequent tests will no longer throw an exception or BAIL_OUT().

set_failure_handler

If you prefer other behavior to 'die_on_fail' or 'bail_on_fail', you can set your own failure handler:

set_failure_handler( sub {
    my $builder = shift;
    if ( $builder && $builder->{Test_Results}[-1] =~ /critical/ ) {
       send_admin_email("critical failure in tests");
    }
} );

It receives the Test::Builder instance as its only argument.

Important: Note that if the failing test is the very last test run, then the $builder will likely be undefined. This is an unfortunate side effect of how Test::Builder has been designed.

explain

Similar to note(), the output will only be seen by the user by using the -v switch with prove or reading the raw TAP.

Unlike note(), any reference in the argument list is automatically expanded using Data::Dumper. Thus, instead of this:

my $self = Some::Object->new($id);
use Data::Dumper;
explain 'I was just created', Dumper($self);

You can now just do this:

my $self = Some::Object->new($id);
explain 'I was just created:  ', $self;

That output will look similar to:

I was just created: bless( {
  'id' => 2,
  'stack' => []
}, 'Some::Object' )

Note that the "dumpered" output has the Data::Dumper variables $Indent, Sortkeys and Terse all set to the value of 1 (one). This allows for a much cleaner diagnostic output and at the present time cannot be overridden.

Note that Test::More's explain acts differently. This explain is equivalent to note explain in Test::More.

show

Experimental. Just like explain, but also tries to show you the lexical variable names:

my $var   = 3;
my @array = qw/ foo bar /;
show $var, \@array;
__END__
$var = 3;
@array = [
    'foo',
    'bar'
];

It will show $VAR1, $VAR2 ... $VAR_N for every variable it cannot figure out the variable name to:

my @array = qw/ foo bar /;
show @array;
__END__
$VAR1 = 'foo';
$VAR2 = 'bar';

Note that this relies on Data::Dumper::Names version 0.03 or greater. If this is not present, it will warn and call explain instead. Also, it can only show the names for lexical variables. Globals such as %ENV or %@ are not accessed via PadWalker and thus cannot be shown. It would be nice to find a workaround for this.

always_explain and always_show

These are identical to explain and show, but like Test::More's diag function, these will always emit output, regardless of whether or not you're in verbose mode.

all_done

DEPRECATED. Use the new done_testing() (added in Test::More since 0.87_01). Instead. We're leaving this in here for a long deprecation cycle. After a while, we might even start warning.

If the plan is specified as defer_plan, you may call &all_done at the end of the test with an optional test number. This lets you set the plan without knowing the plan before you run the tests.

If you call it without a test number, the tests will still fail if you don't get to the end of the test. This is useful if you don't want to specify a plan but the tests exit unexpectedly. For example, the following would pass with no_plan but fails with all_done.

use Test::More 'defer_plan';
ok 1;
exit;
ok 2;
all_done;

See "Deferred plans" for more information.

EXPORT ON DEMAND

The following will be exported only if requested:

timeit

Prototype: timeit(&;$)

This function will warn if Time::HiRes is not installed. The test will still be run, but no timing information will be displayed.

use Test::Most 'timeit';
timeit { is expensive_function(), $some_value, $message }
   "expensive_function()";
timeit { is expensive_function(), $some_value, $message };

timeit accepts a code reference and an optional message. After the test is run, will explain the time of the function using Time::HiRes. If a message is supplied, it will be formatted as:

sprintf "$message: took %s seconds" => $time;

Otherwise, it will be formatted as:

sprintf "$filename line $line: took %s seconds" => $time;

DIE OR BAIL ON FAIL

Sometimes you want your test suite to throw an exception or BAIL_OUT() if a test fails. In order to provide maximum flexibility, there are three ways to accomplish each of these.

Import list

use Test::Most 'die', tests => 7;
use Test::Most qw< no_plan bail >;

If die or bail is anywhere in the import list, the test program/suite will throw a Test::Most::Exception or BAIL_OUT() as appropriate the first time a test fails. Calling restore_fail anywhere in the test program will restore the original behavior (not throwing an exception or bailing out).

Functions

use Test::Most 'no_plan';
ok $bar, 'The test suite will continue if this passes';

die_on_fail;
is_deeply $foo, bar, '... we throw an exception if this fails';

restore_fail;
ok $baz, 'The test suite will continue if this passes';

The die_on_fail and bail_on_fail functions will automatically set the desired behavior at runtime.

Environment variables

DIE_ON_FAIL=1 prove t/
BAIL_ON_FAIL=1 prove t/

If the DIE_ON_FAIL or BAIL_ON_FAIL environment variables are true, any tests which use Test::Most will throw an exception or call BAIL_OUT on test failure.

MISCELLANEOUS

Moose

It used to be that this module would produce a warning when used with Moose:

Prototype mismatch: sub main::blessed ($) vs none

This was because Test::Deep exported a blessed() function by default, but its prototype did not match the Moose version's prototype. We now exclude the Test::Deep version by default. If you need it, you can call the fully-qualified version or request it on the command line:

use Test::Most 'blessed';

Note that as of version 0.34, reftype is also excluded from Test::Deep's import list. This was causing issues with people trying to use Scalar::Util's reftype function.

Excluding Test Modules

Sometimes you want a exclude a particular test module. For example, Test::Deep, when used with Moose, produces the following warning:

Prototype mismatch: sub main::blessed ($) vs none

You can exclude this with by adding the module to the import list with a '-' symbol in front:

use Test::Most tests => 42, '-Test::Deep';

See https://rt.cpan.org/Ticket/Display.html?id=54362&results=e73ff63c5bf9ba0f796efdba5773cf3f for more information.

Excluding Test Symbols

Sometimes you don't want to exclude an entire test module, but just a particular symbol that is causing issues You can exclude the symbol(s) in the standard way, by specifying the symbol in the import list with a '!' in front:

use Test::Most tests => 42, '!throws_ok';

Deferred plans

DEPRECATED and will be removed in some future release of this module. Using defer_plan will carp(). Use done_testing() from Test::More instead.

use Test::Most qw<defer_plan>;
use My::Tests;
my $test_count = My::Tests->run;
all_done($test_count);

Sometimes it's difficult to know the plan up front, but you can calculate the plan as your tests run. As a result, you want to defer the plan until the end of the test. Typically, the best you can do is this:

use Test::More 'no_plan';
use My::Tests;
My::Tests->run;

But when you do that, Test::Builder merely asserts that the number of tests you ran is the number of tests. Until now, there was no way of asserting that the number of tests you expected is the number of tests unless you do so before any tests have run. This fixes that problem.

One-stop shopping

We generally require the latest stable versions of various test modules. Why? Because they have bug fixes and new features. You don't want to have to keep remembering them, so periodically we'll release new versions of Test::Most just for bug fixes.

use ok

We do not bundle Test::use::ok, though it's been requested. That's because use_ok is broken, but Test::use::ok is also subtly broken (and a touch harder to fix). See http://use.perl.org/~Ovid/journal/39859 for more information.

If you want to test if you can use a module, just use it. If it fails, the test will still fail and that's the desired result.

RATIONALE

People want more control over their test suites. Sometimes when you see hundreds of tests failing and whizzing by, you want the test suite to simply halt on the first failure. This module gives you that control.

As for the reasons for the four test modules chosen, I ran code over a local copy of the CPAN to find the most commonly used testing modules. Here's the top twenty as of January 2010 (the numbers are different because we're now counting distributions which use a given module rather than simply the number of times a module is used).

1   Test::More                          14111
2   Test                                 1736
3   Test::Exception                       744
4   Test::Simple                          331
5   Test::Pod                             328
6   Test::Pod::Coverage                   274
7   Test::Perl::Critic                    248
8   Test::Base                            228
9   Test::NoWarnings                      155
10  Test::Distribution                    142
11  Test::Kwalitee                        138
12  Test::Deep                            128
13  Test::Warn                            127
14  Test::Differences                     102
15  Test::Spelling                        101
16  Test::MockObject                       87
17  Test::Builder::Tester                  84
18  Test::WWW::Mechanize::Catalyst         79
19  Test::UseAllModules                    63
20  Test::YAML::Meta                       61

Test::Most is number 24 on that list, if you're curious. See http://blogs.perl.org/users/ovid/2010/01/most-popular-testing-modules---january-2010.html.

The modules chosen seemed the best fit for what Test::Most is trying to do. As of 0.02, we've added Test::Warn by request. It's not in the top ten, but it's a great and useful module.

AUTHOR

Curtis Poe, <ovid at cpan.org>

BUGS

Please report any bugs or feature requests to bug-test-extended at rt.cpan.org, or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Test-Most. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes.

SUPPORT

You can find documentation for this module with the perldoc command.

perldoc Test::Most

You can also look for information at:

TODO

Deferred plans

Sometimes you don't know the number of tests you will run when you use Test::More. The plan() function allows you to delay specifying the plan, but you must still call it before the tests are run. This is an error:

use Test::More;

my $tests = 0;
foreach my $test (
    my $count = run($test); # assumes tests are being run
    $tests += $count;
}
plan($tests);

The way around this is typically to use 'no_plan' and when the tests are done, Test::Builder merely sets the plan to the number of tests run. We'd like for the programmer to specify this number instead of letting Test::Builder do it. However, Test::Builder internals are a bit difficult to work with, so we're delaying this feature.

Cleaner skip()

if ( $some_condition ) {
    skip $message, $num_tests;
}
else {
    # run those tests
}

That would be cleaner and I might add it if enough people want it.

CAVEATS

Because of how Perl handles arguments, and because diagnostics are not really part of the Test Anything Protocol, what actually happens internally is that we note that a test has failed and we throw an exception or bail out as soon as the next test is called (but before it runs). This means that its arguments are automatically evaluated before we can take action:

use Test::Most qw<no_plan die>;

ok $foo, 'Die if this fails';
ok factorial(123456),
  '... but wait a loooong time before you throw an exception';

ACKNOWLEDGEMENTS

Many thanks to perl-qa for arguing about this so much that I just went ahead and did it :)

Thanks to Aristotle for suggesting a better way to die or bailout.

Thanks to 'swillert' (http://use.perl.org/~swillert/) for suggesting a better implementation of my "dumper explain" idea (http://use.perl.org/~Ovid/journal/37004).

COPYRIGHT & LICENSE

Copyright 2008 Curtis Poe, all rights reserved.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.