The Perl Toolchain Summit needs more sponsors. If your company depends on Perl, please support this very important event.
 / 
Perl-Critic-1.076
River stage three • 133 direct dependents • 408 total dependents
130 ++
/ Perl::Critic

NAME

Perl::Critic - Critique Perl source code for best-practices

SYNOPSIS

  use Perl::Critic;
  my $file = shift;
  my $critic = Perl::Critic->new();
  my @violations = $critic->critique($file);
  print @violations;

DESCRIPTION

Perl::Critic is an extensible framework for creating and applying coding standards to Perl source code. Essentially, it is a static source code analysis engine. Perl::Critic is distributed with a number of Perl::Critic::Policy modules that attempt to enforce various coding guidelines. Most Policy modules are based on Damian Conway's book Perl Best Practices. However, Perl::Critic is not limited to PBP and will even support Policies that contradict Conway. You can enable, disable, and customize those Polices through the Perl::Critic interface. You can also create new Policy modules that suit your own tastes.

For a command-line interface to Perl::Critic, see the documentation for perlcritic. If you want to integrate Perl::Critic with your build process, Test::Perl::Critic provides an interface that is suitable for test scripts. Also, Test::Perl::Critic::Progressive is useful for gradually applying coding standards to legacy code. For the ultimate convenience (at the expense of some flexibility) see the criticism pragma.

Win32 and ActivePerl users can find PPM distributions of Perl::Critic at http://theoryx5.uwinnipeg.ca/ppms/.

If you'd like to try Perl::Critic without installing anything, there is a web-service available at http://perlcritic.com. The web-service does not yet support all the configuration features that are available in the native Perl::Critic API, but it should give you a good idea of what it does. You can also invoke the perlcritic web-service from the command-line by doing an HTTP-post, such as one of these:

   $> POST http://perlcritic.com/perl/critic.pl < MyModule.pm
   $> lwp-request -m POST http://perlcritic.com/perl/critic.pl < MyModule.pm
   $> wget -q -O - --post-file=MyModule.pm http://perlcritic.com/perl/critic.pl

Please note that the perlcritic web-service is still alpha code. The URL and interface to the service are subject to change.

CONSTRUCTOR

new( [ -profile => $FILE, -severity => $N, -theme => $string, -include => \@PATTERNS, -exclude => \@PATTERNS, -top => $N, -only => $B, -profile-strictness => $PROFILE_STRICTNESS_{WARN|FATAL|QUIET}, -force => $B, -verbose => $N ], -color => $B )
new( -config => Perl::Critic::Config->new() )
new()

Returns a reference to a new Perl::Critic object. Most arguments are just passed directly into Perl::Critic::Config, but I have described them here as well. The default value for all arguments can be defined in your .perlcriticrc file. See the "CONFIGURATION" section for more information about that. All arguments are optional key-value pairs as follows:

-profile is a path to a configuration file. If $FILE is not defined, Perl::Critic::Config attempts to find a .perlcriticrc configuration file in the current directory, and then in your home directory. Alternatively, you can set the PERLCRITIC environment variable to point to a file in another location. If a configuration file can't be found, or if $FILE is an empty string, then all Policies will be loaded with their default configuration. See "CONFIGURATION" for more information.

-severity is the minimum severity level. Only Policy modules that have a severity greater than $N will be applied. Severity values are integers ranging from 1 (least severe) to 5 (most severe). The default is 5. For a given -profile, decreasing the -severity will usually reveal more Policy violations. You can set the default value for this option in your .perlcriticrc file. Users can redefine the severity level for any Policy in their .perlcriticrc file. See "CONFIGURATION" for more information.

If it is difficult for you to remember whether severity "5" is the most or least restrictive level, then you can use one of these named values:

    SEVERITY NAME   ...is equivalent to...   SEVERITY NUMBER
    --------------------------------------------------------
    -severity => 'gentle'                     -severity => 5
    -severity => 'stern'                      -severity => 4
    -severity => 'harsh'                      -severity => 3
    -severity => 'cruel'                      -severity => 2
    -severity => 'brutal'                     -severity => 1

-theme is special expression that determines which Policies to apply based on their respective themes. For example, the following would load only Policies that have a 'bugs' AND 'pbp' theme:

  my $critic = Perl::Critic->new( -theme => 'bugs && pbp' );

Unless the -severity option is explicitly given, setting -theme silently causes the -severity to be set to 1. You can set the default value for this option in your .perlcriticrc file. See the "POLICY THEMES" section for more information about themes.

-include is a reference to a list of string @PATTERNS. Policy modules that match at least one m/$PATTERN/imx will always be loaded, irrespective of all other settings. For example:

  my $critic = Perl::Critic->new(-include => ['layout'] -severity => 4);

This would cause Perl::Critic to apply all the CodeLayout::* Policy modules even though they have a severity level that is less than 4. You can set the default value for this option in your .perlcriticrc file. You can also use -include in conjunction with the -exclude option. Note that -exclude takes precedence over -include when a Policy matches both patterns.

-exclude is a reference to a list of string @PATTERNS. Policy modules that match at least one m/$PATTERN/imx will not be loaded, irrespective of all other settings. For example:

  my $critic = Perl::Critic->new(-exclude => ['strict'] -severity => 1);

This would cause Perl::Critic to not apply the RequireUseStrict and ProhibitNoStrict Policy modules even though they have a severity level that is greater than 1. You can set the default value for this option in your .perlcriticrc file. You can also use -exclude in conjunction with the -include option. Note that -exclude takes precedence over -include when a Policy matches both patterns.

-single-policy is a string PATTERN. Only one policy that matches m/$PATTERN/imx will be used. Policies that do not match will be excluded. This option has precedence over the -severity, -theme, -include, -exclude, and -only options. You can set the default value for this option in your .perlcriticrc file.

-top is the maximum number of Violations to return when ranked by their severity levels. This must be a positive integer. Violations are still returned in the order that they occur within the file. Unless the -severity option is explicitly given, setting -top silently causes the -severity to be set to 1. You can set the default value for this option in your .perlcriticrc file.

-only is a boolean value. If set to a true value, Perl::Critic will only choose from Policies that are mentioned in the user's profile. If set to a false value (which is the default), then Perl::Critic chooses from all the Policies that it finds at your site. You can set the default value for this option in your .perlcriticrc file.

-profile-strictness is an enumerated value, one of "$PROFILE_STRICTNESS_WARN" in Perl::Critic::Utils::Constants (the default), "$PROFILE_STRICTNESS_FATAL" in Perl::Critic::Utils::Constants, and "$PROFILE_STRICTNESS_QUIET" in Perl::Critic::Utils::Constants. If set to "$PROFILE_STRICTNESS_FATAL" in Perl::Critic::Utils::Constants, Perl::Critic will make certain warnings about problems found in a .perlcriticrc or file specified via the -profile option fatal. For example, Perl::Critic normally only warns about profiles referring to non-existent Policies, but this value makes this situation fatal. Correspondingly, "$PROFILE_STRICTNESS_QUIET" in Perl::Critic::Utils::Constants makes Perl::Critic shut up about these things.

-force is a boolean value that controls whether Perl::Critic observes the magical "## no critic" pseudo-pragmas in your code. If set to a true value, Perl::Critic will analyze all code. If set to a false value (which is the default) Perl::Critic will ignore code that is tagged with these comments. See "BENDING THE RULES" for more information. You can set the default value for this option in your .perlcriticrc file.

-verbose can be a positive integer (from 1 to 11), or a literal format specification. See Perl::Critic::Violations for an explanation of format specifications. You can set the default value for this option in your .perlcriticrc file.

-color is not used by Perl::Critic but is provided for the benefit of perlcritic.

-config is a reference to a Perl::Critic::Config object. If you have created your own Config object for some reason, you can pass it in here instead of having Perl::Critic create one for you. Using the -config option causes all the other options to be silently ignored.

METHODS

critique( $source_code )

Runs the $source_code through the Perl::Critic engine using all the Policies that have been loaded into this engine. If $source_code is a scalar reference, then it is treated as a string of actual Perl code. If $source_code is a reference to an instance of PPI::Document, then that instance is used directly. Otherwise, it is treated as a path to a local file containing Perl code. This method returns a list of Perl::Critic::Violation objects for each violation of the loaded Policies. The list is sorted in the order that the Violations appear in the code. If there are no violations, this method returns an empty list.

add_policy( -policy => $policy_name, -params => \%param_hash )

Creates a Policy object and loads it into this Critic. If the object cannot be instantiated, it will throw a fatal exception. Otherwise, it returns a reference to this Critic.

-policy is the name of a Perl::Critic::Policy subclass module. The 'Perl::Critic::Policy' portion of the name can be omitted for brevity. This argument is required.

-params is an optional reference to a hash of Policy parameters. The contents of this hash reference will be passed into to the constructor of the Policy module. See the documentation in the relevant Policy module for a description of the arguments it supports.

policies()

Returns a list containing references to all the Policy objects that have been loaded into this engine. Objects will be in the order that they were loaded.

config()

Returns the Perl::Critic::Config object that was created for or given to this Critic.

statistics()

Returns the Perl::Critic::Statistics object that was created for this Critic. The Statistics object accumulates data for all files that are analyzed by this Critic.

FUNCTIONAL INTERFACE

For those folks who prefer to have a functional interface, The critique method can be exported on request and called as a static function. If the first argument is a hashref, its contents are used to construct a new Perl::Critic object internally. The keys of that hash should be the same as those supported by the Perl::Critic::new method. Here are some examples:

  use Perl::Critic qw(critique);

  # Use default parameters...
  @violations = critique( $some_file );

  # Use custom parameters...
  @violations = critique( {-severity => 2}, $some_file );

  # As a one-liner
  %> perl -MPerl::Critic=critique -e 'print critique(shift)' some_file.pm

None of the other object-methods are currently supported as static functions. Sorry.

CONFIGURATION

Most of the settings for Perl::Critic and each of the Policy modules can be controlled by a configuration file. The default configuration file is called .perlcriticrc. Perl::Critic will look for this file in the current directory first, and then in your home directory. Alternatively, you can set the PERLCRITIC environment variable to explicitly point to a different file in another location. If none of these files exist, and the -profile option is not given to the constructor, then all the modules that are found in the Perl::Critic::Policy namespace will be loaded with their default configuration.

The format of the configuration file is a series of INI-style blocks that contain key-value pairs separated by '='. Comments should start with '#' and can be placed on a separate line or after the name-value pairs if you desire.

Default settings for Perl::Critic itself can be set before the first named block. For example, putting any or all of these at the top of your configuration file will set the default value for the corresponding constructor argument.

    severity  = 3                                     #Integer or named level
    only      = 1                                     #Zero or One
    force     = 0                                     #Zero or One
    verbose   = 4                                     #Integer or format spec
    top       = 50                                    #A positive integer
    theme     = (pbp || security) && bugs             #A theme expression
    include   = NamingConventions ClassHierarchies    #Space-delimited list
    exclude   = Variables  Modules::RequirePackage    #Space-delimited list
    color     = 1                                     #Zero or One

The remainder of the configuration file is a series of blocks like this:

    [Perl::Critic::Policy::Category::PolicyName]
    severity = 1
    set_themes = foo bar
    add_themes = baz
    arg1 = value1
    arg2 = value2

Perl::Critic::Policy::Category::PolicyName is the full name of a module that implements the policy. The Policy modules distributed with Perl::Critic have been grouped into categories according to the table of contents in Damian Conway's book Perl Best Practices. For brevity, you can omit the 'Perl::Critic::Policy' part of the module name.

severity is the level of importance you wish to assign to the Policy. All Policy modules are defined with a default severity value ranging from 1 (least severe) to 5 (most severe). However, you may disagree with the default severity and choose to give it a higher or lower severity, based on your own coding philosophy. You can set the severity to an integer from 1 to 5, or use one of the equivalent names:

    SEVERITY NAME ...is equivalent to... SEVERITY NUMBER
    ----------------------------------------------------
    gentle                                             5
    stern                                              4
    harsh                                              3
    cruel                                              2
    brutal                                             1

set_themes sets the theme for the Policy and overrides its default theme. The argument is a string of one or more whitespace-delimited alphanumeric words. Themes are case-insensitive. See "POLICY THEMES" for more information.

add_themes appends to the default themes for this Policy. The argument is a string of one or more whitespace-delimited words. Themes are case-insensitive. See "POLICY THEMES" for more information.

The remaining key-value pairs are configuration parameters that will be passed into the constructor for that Policy. The constructors for most Policy objects do not support arguments, and those that do should have reasonable defaults. See the documentation on the appropriate Policy module for more details.

Instead of redefining the severity for a given Policy, you can completely disable a Policy by prepending a '-' to the name of the module in your configuration file. In this manner, the Policy will never be loaded, regardless of the -severity given to the Perl::Critic constructor.

A simple configuration might look like this:

    #--------------------------------------------------------------
    # I think these are really important, so always load them

    [TestingAndDebugging::RequireUseStrict]
    severity = 5

    [TestingAndDebugging::RequireUseWarnings]
    severity = 5

    #--------------------------------------------------------------
    # I think these are less important, so only load when asked

    [Variables::ProhibitPackageVars]
    severity = 2

    [ControlStructures::ProhibitPostfixControls]
    allow = if unless  # My custom configuration
    severity = cruel   # Same as "severity = 2"

    #--------------------------------------------------------------
    # Give these policies a custom theme.  I can activate just
    # these policies by saying `perlcritic -theme larry`

    [Modules::RequireFilenameMatchesPackage]
    add_themes = larry

    [TestingAndDebugging::RequireTestLables]
    add_themes = larry curly moe

    #--------------------------------------------------------------
    # I do not agree with these at all, so never load them

    [-NamingConventions::ProhibitMixedCaseVars]
    [-NamingConventions::ProhibitMixedCaseSubs]

    #--------------------------------------------------------------
    # For all other Policies, I accept the default severity,
    # so no additional configuration is required for them.

For additional configuration examples, see the perlcriticrc file that is included in this examples directory of this distribution.

Damian Conway's own Perl::Critic configuration is also included in this distribution as examples/perlcriticrc-conway.

THE POLICIES

A large number of Policy modules are distributed with Perl::Critic. They are described briefly in the companion document Perl::Critic::PolicySummary and in more detail in the individual modules themselves. Say "perlcritic -doc PATTERN" to see the perldoc for all Policy modules that match the regex m/PATTERN/imx

There are a number of distributions of additional policies on CPAN. If Perl::Critic doesn't contain a policy that you want, some one may have already written it. See the "SEE ALSO" section below for a list of some of these distributions.

POLICY THEMES

Each Policy is defined with one or more "themes". Themes can be used to create arbitrary groups of Policies. They are intended to provide an alternative mechanism for selecting your preferred set of Policies. For example, you may wish disable a certain subset of Policies when analyzing test scripts. Conversely, you may wish to enable only a specific subset of Policies when analyzing modules.

The Policies that ship with Perl::Critic are have been broken into the following themes. This is just our attempt to provide some basic logical groupings. You are free to invent new themes that suit your needs.

    THEME             DESCRIPTION
    --------------------------------------------------------------------------
    core              All policies that ship with Perl::Critic
    pbp               Policies that come directly from "Perl Best Practices"
    bugs              Policies that that prevent or reveal bugs
    maintenance       Policies that affect the long-term health of the code
    cosmetic          Policies that only have a superficial effect
    complexity        Policies that specificaly relate to code complexity
    security          Policies that relate to security issues
    tests             Policies that are specific to test scripts

Any Policy may fit into multiple themes. Say "perlcritic -list" to get a listing of all available Policies and the themes that are associated with each one. You can also change the theme for any Policy in your .perlcriticrc file. See the "CONFIGURATION" section for more information about that.

Using the -theme option, you can create an arbitrarily complex rule that determines which Policies will be loaded. Precedence is the same as regular Perl code, and you can use parens to enforce precedence as well. Supported operators are:

   Operator    Altertative    Example
   ----------------------------------------------------------------------------
   &&          and            'pbp && core'
   ||          or             'pbp || (bugs && security)'
   !           not            'pbp && ! (portability || complexity)'

Theme names are case-insensitive. If the -theme is set to an empty string, then it evaluates as true all Policies.

BENDING THE RULES

Perl::Critic takes a hard-line approach to your code: either you comply or you don't. In the real world, it is not always practical (nor even possible) to fully comply with coding standards. In such cases, it is wise to show that you are knowingly violating the standards and that you have a Damn Good Reason (DGR) for doing so.

To help with those situations, you can direct Perl::Critic to ignore certain lines or blocks of code by using pseudo-pragmas:

    require 'LegacyLibaray1.pl';  ## no critic
    require 'LegacyLibrary2.pl';  ## no critic

    for my $element (@list) {

        ## no critic

        $foo = "";               #Violates 'ProhibitEmptyQuotes'
        $barf = bar() if $foo;   #Violates 'ProhibitPostfixControls'
        #Some more evil code...

        ## use critic

        #Some good code...
        do_something($_);
    }

The "## no critic" comments direct Perl::Critic to ignore the remaining lines of code until the end of the current block, or until a "## use critic" comment is found (whichever comes first). If the "## no critic" comment is on the same line as a code statement, then only that line of code is overlooked. To direct perlcritic to ignore the "## no critic" comments, use the -force option.

A bare "## no critic" comment disables all the active Policies. If you wish to disable only specific Policies, add a list of Policy names as arguments, just as you would for the "no strict" or "no warnings" pragmas. For example, this would disable the ProhibitEmptyQuotes and ProhibitPostfixControls policies until the end of the block or until the next "## use critic" comment (whichever comes first):

  ## no critic (EmptyQuotes, PostfixControls)

  # Now exempt from ValuesAndExpressions::ProhibitEmptyQuotes
  $foo = "";

  # Now exempt ControlStructures::ProhibitPostfixControls
  $barf = bar() if $foo;

  # Still subjected to ValuesAndExpression::RequireNumberSeparators
  $long_int = 10000000000;

Since the Policy names are matched against the "## no critic" arguments as regular expressions, you can abbreviate the Policy names or disable an entire family of Policies in one shot like this:

  ## no critic (NamingConventions)

  # Now exempt from NamingConventions::ProhibitMixedCaseVars
  my $camelHumpVar = 'foo';

  # Now exempt from NamingConventions::ProhibitMixedCaseSubs
  sub camelHumpSub {}

The argument list must be enclosed in parens and must contain one or more comma-separated barewords (e.g. don't use quotes). The "## no critic" pragmas can be nested, and Policies named by an inner pragma will be disabled along with those already disabled an outer pragma.

Some Policies like Subroutines::ProhibitExcessComplexity apply to an entire block of code. In those cases, "## no critic" must appear on the line where the violation is reported. For example:

  sub complicated_function {  ## no critic (ProhibitExcessComplexity)
      # Your code here...
  }

Policies such as Documentation::RequirePodSections apply to the entire document, in which case violations are reported at line 1. But if the file requires a shebang line, it is impossible to put "## no critic" on the first line of the file. This is a known limitation and it will be addressed in a future release. As a workaround, you can disable the affected policies at the command-line or in your .perlcriticrc file. But beware that this will affect the analysis of all files.

Use this feature wisely. "## no critic" should be used in the smallest possible scope, or only on individual lines of code. And you should always be as specific as possible about which policies you want to disable (i.e. never use a bare "## no critic"). If Perl::Critic complains about your code, try and find a compliant solution before resorting to this feature.

IMPORTANT CHANGES

Perl-Critic is evolving rapidly, so some of the interfaces have changed in ways that are not backward-compatible. If you have been using an older version of Perl-Critic and/or you have been developing custom Policy modules, please read this section carefully.

VERSION 0.23

In version 0.23, the syntax for theme rules changed. The mathematical operators ( "*", "+", "-" ) are no longer supported. You must use logical operators instead ( "&&", "!", "||" ). However the meanings of these operators is effectively the same. See "POLICY THEMES" for more details.

VERSION 0.21

In version 0.21, we introduced the concept of policy "themes". All you existing custom Policies should still be compatible. But to take advantage of the theme feature, you should add a default_themes method to your custom Policy modules. See Perl::Critic::DEVELOPER for an up-to-date guide on creating Policy modules.

The internals of Perl::Critic were also refactored significantly. The public API is largely unchanged, but if you've been accessing bits inside Perl::Critic, then you may be in for a surprise.

VERSION 0.16

Starting in version 0.16, you can add a list Policy names as arguments to the "## no critic" pseudo-pragma. This feature allows you to disable specific policies. So if you have been in the habit of adding additional words after "no critic", then those words might cause unexpected results. If you want to append other stuff to the "## no critic" comment, then terminate the pseudo-pragma with a semi-colon, and then start another comment. For example:

    #This may not work as expected.
    $email = 'foo@bar.com';  ## no critic for literal '@'

    #This will work.
    $email = 'foo@bar.com';  ## no critic; #for literal '@'

    #This is even better.
    $email = 'foo@bar.com'; ## no critic (RequireInterpolation);

VERSION 0.14

Starting in version 0.14, the interface to Perl::Critic::Violation changed. This will also break any custom Policy modules that you might have written for earlier modules. See Perl::Critic::DEVELOPER for an up-to-date guide on creating Policy modules.

The notion of "priority" was also replaced with "severity" in version 0.14. Consequently, the default behavior of Perl::Critic is to only load the most "severe" Policy modules, rather than loading all of them. This decision was based on user-feedback suggesting that Perl-Critic should be less critical for new users, and should steer them toward gradually increasing the strictness as they progressively adopt better coding practices.

VERSION 0.11

Starting in version 0.11, the internal mechanics of Perl-Critic were rewritten so that only one traversal of the PPI document tree is required. Unfortunately, this will break any custom Policy modules that you might have written for earlier versions. Converting your policies to work with the new version is pretty easy and actually results in cleaner code. See Perl::Critic::DEVELOPER for an up-to-date guide on creating Policy modules.

THE Perl::Critic PHILOSOPHY

  Coding standards are deeply personal and highly subjective.  The
  goal of Perl::Critic is to help you write code that conforms with a
  set of best practices.  Our primary goal is not to dictate what
  those practices are, but rather, to implement the practices
  discovered by others.  Ultimately, you make the rules --
  Perl::Critic is merely a tool for encouraging consistency.  If there
  is a policy that you think is important or that we have overlooked,
  we would be very grateful for contributions, or you can simply load
  your own private set of policies into Perl::Critic.

EXTENDING THE CRITIC

The modular design of Perl::Critic is intended to facilitate the addition of new Policies. You'll need to have some understanding of PPI, but most Policy modules are pretty straightforward and only require about 20 lines of code. Please see the Perl::Critic::DEVELOPER file included in this distribution for a step-by-step demonstration of how to create new Policy modules.

If you develop any new Policy modules, feel free to send them to <thaljef@cpan.org> and I'll be happy to put them into the Perl::Critic distribution. Or if you would like to work on the Perl::Critic project directly, check out our repository at http://perlcritic.tigris.org. To subscribe to our mailing list, send a message to <dev-subscribe@perlcritic.tigris.org>.

The Perl::Critic team is also available for hire. If your organization has its own coding standards, we can create custom Policies to enforce your local guidelines. Or if your code base is prone to a particular defect pattern, we can design Policies that will help you catch those costly defects before they go into production. To discuss your needs with the Perl::Critic team, just contact <thaljef@cpan.org>.

PREREQUISITES

Perl::Critic requires the following modules:

B::Keywords

Config::Tiny

File::Spec

IO::String

List::Util

List::MoreUtils

Module::Pluggable

PPI

Pod::PlainText

Pod::Usage

Readonly

String::Format

String::Util

The following modules are optional, but recommended for complete testing:

File::HomeDir

File::Which

IO::String

IPC::Open2

Perl::Tidy

Pod::Spell

Test::Pod

Test::Pod::Coverage

Text::ParseWords

CONTACTING THE DEVELOPMENT TEAM

You are encouraged to subscribe to the mailing list; send a message to <users-subscribe@perlcritic.tigris.org>. See also the archives. You can also contact the author at <thaljef@cpan.org>.

At least one member of the development team has started hanging around in irc://irc.perl.org/#perlcritic.

SEE ALSO

There are a number of distributions of additional Policies available. A few are listed here:

Perl::Critic::More

Perl::Critic::Bangs

Perl::Critic::Lax

Perl::Critic::StricterSubs

Perl::Critic::Swift

Perl::Critic::Tics

These distributions enable you to use Perl::Critic in your unit tests:

Test::Perl::Critic

Test::Perl::Critic::Progressive

There are also a couple of distributions that will install all the Perl::Critic related modules known to the development team:

Bundle::Perl::Critic

Task::Perl::Critic

If you want to make sure you have absolutely everything, you can use these:

Bundle::Perl::Critic::IncludingOptionalDependencies

Task::Perl::Critic::IncludingOptionalDependencies

BUGS

Scrutinizing Perl code is hard for humans, let alone machines. If you find any bugs, particularly false-positives or false-negatives from a Perl::Critic::Policy, please submit them to http://rt.cpan.org/NoAuth/Bugs.html?Dist=Perl-Critic. Thanks.

Most policies will produce false-negatives if they cannot understand a particular block of code.

CREDITS

Adam Kennedy - For creating PPI, the heart and soul of Perl::Critic.

Damian Conway - For writing Perl Best Practices, finally :)

Chris Dolan - For contributing the best features and Policy modules.

Andy Lester - Wise sage and master of all-things-testing.

Elliot Shank - The self-proclaimed quality freak.

Giuseppe Maxia - For all the great ideas and positive encouragement.

and Sharon, my wife - For putting up with my all-night code sessions.

Thanks also to the Perl Foundation for providing a grant to support Chris Dolan's project to implement twenty PBP policies. http://www.perlfoundation.org/april_1_2007_new_grant_awards

AUTHOR

Jeffrey Ryan Thalhammer <thaljef@cpan.org>

COPYRIGHT

Copyright (c) 2005-2007 Jeffrey Ryan Thalhammer. All rights reserved.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. The full text of this license can be found in the LICENSE file included with this module.